|
|
|
Drybreak
Non-Spill Couplings |
|
A
term given to a sliding sleeve style hydraulic quick disconnect with
features that include an ability to connect with virtually no air
inclusion or disconnect with little or no spillage. Also commonly referred
to as Non-Spill, Flat Face, and Clean Break.
|
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
71
Series
Applications: Hydraulic, chemical service, ideal for test stands and
applications where endurance and cleanliness is a requirement.
Most
Popular, Economical Drybreak Push-to-connect design Available in Sizes
1/8" thru 2" Working Pressures to 10,000 psi (690 bar) Available in
Steel, Stainless Steel, or High Pressure Stainless Steel Safety
Sleevelock optional |
 |
74
Series
Applications:
Construction &
mobile equipment, hydraulic hand tools, in-plant hydraulics anywhere a
drybreak is required for cleanliness or where thermal expansion exists.
ISO
16028 Interchange Connect under Pressure Capability available in 1/2"
size 3/8" also meets HTMA specifications Push-to-connect design
Available in Sizes 1/4" thru 1" Working Pressures to 4,568 psi (315 bar)
Steel Construction Optional Safety Sleevelock |
|
 |
78
Series
Applications:
Oil well equipment,
sand and salt spreaders, dump and demolition trailers, live bed
trailers, and other heavy duty applications.
Heavy
duty Construction Available with wing nut or hex nut for easy connection
Available in sizes 3/4" thru 1-1/2" Working Pressure to 3,000 psi (207
bar) Brass body construction with plated steel sleeve Steel flange
available for bulkhead mounting of nipple half |
 |
23
Series
Applications:
Mobile equipment,
hydraulic tools, in-plant hydraulics, restaurant equipment, and fluid
reclamation equipment.
Ball-locking design with push-to-connect feature Available in
3/8" and 1/2" sizes Working pressure to 3000 psi (207 bar) Plated
Steel Construction Safety Sleevelock as standard Compact
envelope |
|
 |
77
Series
Applications:
Hydraulic circuits,
test stands, and Hydrotesting for offshore drilling and production
platforms.
Dog-locking design Internal safety sleevelock prevents accidental
disconnection Available in 1/4" size Working pressure to 36,000 psi
(2483 bar) Plated steel or stainless steel construction Autoclave end
fittings available |
 |
28-1 Series
Applications:
Low pressure
hydraulic systems, high purity systems, fuel systems, electronic coolant
and high reliability systems.
Lightweight design Ball-locking with push-to-connect feature
Available in sizes 1/4" thru 2" Working pressures to 1,000 psi (69 bar)
Aluminum or stainless steel construction Performance meets or exceed
MIL-C-7413B and MIL-C-25427A specifications |
|
 |
29
Series
Applications:
High reliability
military, aerospace, and medical applications as well as chemicals and
other corrosive materials.
Ball-locking design with push-to-connect feature Exceeds the
requirements of MIL-C-25427A Available in sizes 1/8" thru 1-1/4"
Working pressures to 5,500 psi (379 bar) Available in Aluminum or 316
stainless steel construction |
|
General Purpose Poppet Style
Couplings |
|
Refers to the type of valve used to stop fluids from flowing when the two
mating parts of a quick disconnect are separated. Chosen for its
simplicity in both function and manufacturability, the poppet style quick
disconnect is the most common type available today.
|
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
H Series
Applications: General purpose, plastic molding,
machine tool, test equipment, agricultural, Department of
Transportation, mobile hydraulics.
Most popular style Wide
range of end fitting options Available in sizes 1/4" thru 6" Working
pressures to 11,000 psi (759 bar) Available in plated steel, brass,
aluminum, or 316 stainless steel construction Double or single
shut-off or straight-through configuration
|
 |
EA
& E Series
Applications: Vacuum pumps, autoclaves, steam
applications, hydraulic return lines, gravity flows.
Excellent high temperature
sealing Handles vacuums down to 29.72" Hg Available Sizes: EA Series
1/4" thru 3/4", E Series 1" thru 4" Working pressures to 3000 psi (207
bar) Available in steel, aluminum, brass and 316 stainless steel End
fitting versatility Double or single shut-off or straight-through
configuration |
|
 |
60 Series
Applications: Snow plows, agriculture, forestry,
construction equipment, oil tools, steel mills.
Ball
locking, poppet style coupling Available in 1/4" and 3/8" Working
pressure to 3,000 psi (207 bar) Available in plated steel construction
Interchangeable with Parker 4000 and Aeroquip FD42 Series Bulkhead
mounting groove standard Double shut-off configuration |
 |
61 Series
Applications: General purpose, plastic molding,
machine tool, test equipment, agriculture, Department of Transportation,
mobile hydraulics.
Coupling
conforms to ISO 7241-1 Series A and ISO 5675 specifications Available in
sizes 1/4" thru 1" Working pressures to 5,000 psi (345 bar) Plated
steel construction Double shut-off configuration Superior pressure and
flow to competition |
|
 |
72
Series
Applications: General purpose, plastic molding,
machine tool, test equipment, Department of Transportation, mobile
hydraulics.
Coupling
conforms to ISO 7241-1 Series B Available in sizes 1/8" thru 1"
Working pressure to 7,500 psi (517 bar) Available in steel, brass, 303
or 316 stainless steel construction Double shut-off configuration
Exceeds pressure and flow capabilities of competition |
 |
75
Series
Applications: Rugged hydraulic applications...oil
fields, offshore drilling, cranes, power tools.
Rugged,
heavy duty Acme thread-to-connect construction Available in sizes 3/4"
thru 4" Working pressure to 3000 psi (207 bar) Available in steel or
stainless steel construction Double shut-off configuration Det Norske
Veritas (DNV) approved Connect-under-pressure
capability |
|
 |
76
Series
Applications: Hydraulic tools and rescue
equipment.
Zero
leak, soft seat poppet valving Sizes 1/4" and 3/8" Working pressures
to 14,500 psi (1,000 bar) Available in rugged plated steel
Thread-to-connect sleeve accommodates hand or wrench connection Double
shut-off configuration Performance exceeds ball style valve
interchanges |
 |
GF
Series
Applications: For plug-in convenience for all gas
grills, ovens, small appliances and caster-mounted restaurant equipment.
Thermal
safety shut-off feature Available sizes 1/4" thru 1-1/4" Working
pressure to 0.5 psi (0.04 bar) Brass construction CSA Certified to ANSI
Z21.41 Single Shut-off, Ball-locking construction Allows for easy
movement of caster mounted appliances |
|
 |
25
Series
Applications: Aromatic hydrocarbons, esters,
ketones, ethers, strong caustics, sulfuric acid, hydrofluoric acid and
many other highly corrosive materials as well as cryogenic service.
Teflon
or Kel F seals available for a host of corrosive materials Sizes 1/4"
thru 1/2" Working pressure to 1,000 psi (69 bar) 316 stainless steel
construction Available as double shut-off or straight-through Optional
safety sleeve lock Ball locking design |
|
Interchange
Couplings |
|
Snap-tite
produces Quick Connect Couplers and Nipples that conform to ISO
Specifications for interchangeability with other manufactures couplings.
We have also developed Quick Release Couplings that will interchange
with specific brands dependent on application.
|
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
|
74
Series
Applications:
Construction &
mobile equipment, hydraulic hand tools, in-plant hydraulics anywhere a
drybreak is required for cleanliness or where thermal expansion exists.
ISO
16028 Interchange Connect under Pressure Capability available in 1/2"
size 3/8" also meets HTMA specifications Push-to-connect design
Available in Sizes 1/4" thru 1" Working Pressures to 4,568 psi (315 bar)
Steel Construction Optional Safety Sleevelock |
|
61 Series
Applications: General purpose, plastic molding,
machine tool, test equipment, agriculture, Department of Transportation,
mobile hydraulics.
Coupling
conforms to ISO 7241-1 Series A and ISO 5675 specifications Available in
sizes 1/4" thru 1" Working pressures to 5,000 psi (345 bar) Plated
steel construction Double shut-off configuration Superior pressure and
flow to competition |
|
|
76
Series
Applications: Hydraulic tools and rescue
equipment.
Zero
leak, soft seat poppet valving Sizes 1/4" and 3/8" Working pressures
to 14,500 psi (1,000 bar) Available in rugged plated steel
Thread-to-connect sleeve accommodates hand or wrench connection Double
shut-off configuration Performance exceeds ball style valve
interchanges |
 |
56
Series
Applications: Rugged, high pressure equipment used
for removal of mill scale or paint, cleaning of maritime vessels and
equipment.
Proven
dog-lock mechanism eliminates ball brinnelling Available in 1/2" size
Working pressure to 10,000 psi (690 bar) Rugged plated steel
construction Safety sleeve lock protects against accidental
disconnection Interchanges with Parker WB and Aeroquip FD69
Series |
|
|
78
Series
Applications:
Oil well equipment,
sand and salt spreaders, dump and demolition trailers, live bed
trailers, and other heavy duty applications.
Heavy
duty Construction Available with wing nut or hex nut for easy connection
Available in sizes 3/4" thru 1-1/2" Working Pressure to 3,000 psi (207
bar) Brass body construction with plated steel sleeve Steel flange
available for bulkhead mounting of nipple half |
|
76
Series
Applications: Hydraulic tools and rescue
equipment.
Zero
leak, soft seat poppet valving Sizes 1/4" and 3/8" Working pressures
to 14,500 psi (1,000 bar) Available in rugged plated steel
Thread-to-connect sleeve accommodates hand or wrench connection Double
shut-off configuration Performance exceeds ball style valve
interchanges |
|
|
60 Series
Applications: Snow plows, agriculture, forestry,
construction equipment, oil tools, steel mills.
Ball
locking, poppet style coupling Available in 1/4" and 3/8" Working
pressure to 3,000 psi (207 bar) Available in plated steel construction
Interchangeable with Parker 4000 and Aeroquip FD42 Series Bulkhead
mounting groove standard Double shut-off configuration |
|
High Pressure
Couplings |
|
Snap-tite
manufactures numerous high pressure couplings with pressure ratings from
10,000 to 40,000 psi. Our couplings assist customers in applications
ranging from offshore drilling to powered hand tools. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
|
56
Series
Applications: Rugged, high pressure equipment used
for removal of mill scale or paint, cleaning of maritime vessels and
equipment.
Proven
dog-lock mechanism eliminates ball brinnelling Available in 1/2" size
Working pressure to 10,000 psi (690 bar) Rugged plated steel
construction Safety sleeve lock protects against accidental
disconnection Interchanges with Parker WB and Aeroquip FD69
Series |
 |
73
Series
Applications: Water jetting, water blasting
systems.
Ball-locking connection with
positive locking collar to prevent
accidental disconnection 1/2" (6mm) size available Working pressure to
40,000 psi (2759 bar) Heavy duty stainless steel construction Double
shut-off or straight through Autoclave High Pressure coned and threaded
end fittings available
|
|
|
77
Series
Applications:
Hydraulic circuits,
test stands, and Hydrotesting for offshore drilling and production
platforms.
Dog-locking design Internal safety sleevelock prevents accidental
disconnection Available in 1/4" size Working pressure to 36,000 psi
(2483 bar) Plated steel or stainless steel construction Autoclave end
fittings available |
|
71
Series
Applications: Hydraulic, chemical service, ideal for test stands and
applications where endurance and cleanliness is a requirement.
Most
Popular, Economical Drybreak Push-to-connect design Available in Sizes
1/8" thru 2" Working Pressures to 10,000 psi (690 bar) Available in
Steel, Stainless Steel, or High Pressure Stainless Steel Safety
Sleevelock optional |
|
|
76
Series
Applications: Hydraulic tools and rescue
equipment.
Zero
leak, soft seat poppet valving Sizes 1/4" and 3/8" Working pressures
to 14,500 psi (1,000 bar) Available in rugged plated steel
Thread-to-connect sleeve accommodates hand or wrench connection Double
shut-off configuration Performance exceeds ball style valve
interchanges |
|
Chemical
Couplings |
|
Designed to
handle aromatic hydrocarbons to strong caustics our chemical coupling
line is capable of handling many of our customers highly corrosive
material.
|
|
Snap-tite Chemical Condensed
Catalog (674kB)
Snap-tite Complete Catalog
(14.3MB) |
|
|
|
71
Series
Applications: Hydraulic, chemical service, ideal for test stands and
applications where endurance and cleanliness is a requirement.
Most
Popular, Economical Drybreak Push-to-connect design Available in Sizes
1/8" thru 2" Working Pressures to 10,000 psi (690 bar) Available in
Steel, Stainless Steel, or High Pressure Stainless Steel Safety
Sleevelock optional |
|
25
Series
Applications: Aromatic hydrocarbons, esters,
ketones, ethers, strong caustics, sulfuric acid, hydrofluoric acid and
many other highly corrosive materials as well as cryogenic service.
Teflon
or Kel F seals available for a host of corrosive materials Sizes 1/4"
thru 1/2" Working pressure to 1,000 psi (69 bar) 316 stainless steel
construction Available as double shut-off or straight-through Optional
safety sleeve lock Ball locking design |
|
 |
K
Series
Kel Fฎ
or Teflonฎ seals for use with caustic & corrosive chemicals
Available in sizes 3/8" thru 2" Working pressures to 2000 psi (138 bar)
Available in stainless steel and aluminum Double shut-off, single
shut-off or straight through available Temperatures to
-400ฐF |
|
28-1 Series
Applications:
Low pressure
hydraulic systems, high purity systems, fuel systems, electronic coolant
and high reliability systems.
Lightweight design Ball-locking with push-to-connect feature
Available in sizes 1/4" thru 2" Working pressures to 1,000 psi (69 bar)
Aluminum or stainless steel construction Performance meets or exceed
MIL-C-7413B and MIL-C-25427A specifications |
|
|
H Series
Applications: General purpose, plastic molding,
machine tool, test equipment, agricultural, Department of
Transportation, mobile hydraulics.
Most popular style Wide
range of end fitting options Available in sizes 1/4" thru 6" Working
pressures to 11,000 psi (759 bar) Available in plated steel, brass,
aluminum, or 316 stainless steel construction Double or single
shut-off or straight-through configuration
|
|
EA
& E Series
Applications: Vacuum pumps, autoclaves, steam
applications, hydraulic return lines, gravity flows.
Excellent high temperature
sealing Handles vacuums down to 29.72" Hg Available Sizes: EA Series
1/4" thru 3/4", E Series 1" thru 4" Working pressures to 3000 psi (207
bar) Available in steel, aluminum, brass and 316 stainless steel End
fitting versatility Double or single shut-off or straight-through
configuration |
|
|
72
Series
Applications: General purpose, plastic molding,
machine tool, test equipment, Department of Transportation, mobile
hydraulics.
Coupling
conforms to ISO 7241-1 Series B Available in sizes 1/8" thru 1"
Working pressure to 7,500 psi (517 bar) Available in steel, brass, 303
or 316 stainless steel construction Double shut-off configuration
Exceeds pressure and flow capabilities of competition |
|
75
Series
Applications: Rugged hydraulic applications...oil
fields, offshore drilling, cranes, power tools.
Rugged,
heavy duty Acme thread-to-connect construction Available in sizes 3/4"
thru 4" Working pressure to 3000 psi (207 bar) Available in steel or
stainless steel construction Double shut-off configuration Det Norske
Veritas (DNV) approved Connect-under-pressure
capability |
|
|
78
Series
Applications:
Oil well equipment,
sand and salt spreaders, dump and demolition trailers, live bed
trailers, and other heavy duty applications.
Heavy
duty Construction Available with wing nut or hex nut for easy connection
Available in sizes 3/4" thru 1-1/2" Working Pressure to 3,000 psi (207
bar) Brass body construction with plated steel sleeve Steel flange
available for bulkhead mounting of nipple half |
 |
6C & 3C Inline Check Valves
Applications: Industrial, mobile
and construction equipment.
Soft
Seat, zero leak poppet check valve Various crack pressures 6C sizes
1/4" thru 1" with working pressures to 6,000 psi (414 bar) 3C sizes
1-1/4" thru 2" with working pressures to 3,000 psi (207 bar) Two piece
construction allows for various end fittings Steel, Stainless Steel or
Brass |
|
Multi-Coupling
Panels |
|
Any application
requiring the connection of multiple couplings such as machine tools,
automotive assembly, injection molding, aircraft engine testing,
offshore oil and gas production and test stands. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
 |
Custom Panel
Designs
Applications: Any
application requiring the connection of more than one coupling, machine
tools, automotive, plastic injection molding, aircraft engine testing,
offshore drilling, and test stands.
Panel
designs prevent cross connection of circuits & improve labor
efficiencies Automatic or manual locking devices to customer
specifications Couplings from 1/8" thru 5" can be utilized All valving
options are available Working pressures to 40,000 psi (2759
bar) |
|
Check
Valves |
|
Snap-tites soft
seat, zero-leak check valve line makes an excellent choice for a wide
variety of applications where free flow in one direction and blocked
flow in the reverse direction is required. These valves can be provided
with various spring pressures and seal options compatible with many
types of fluids. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
CPIFF Series
One Piece Inline
Check Valves
Applications: Industrial, mobile
and construction equipment.
Soft
seat, zero leakage poppet check valve Various crack pressures available
Sizes 1/4" thru 1" Working pressures to 5,000 psi (345 bar) Plated
steel or brass construction Compact one piece design Flow rates to 30
gpm (115 l/min) |
|
6C
& 3C Series
Two Piece Inline Check
Valves
Applications: Industrial, mobile
and construction equipment.
Soft
Seat, zero leak poppet check valve Various crack pressures 6C sizes
1/4" thru 1" with working pressures to 6,000 psi (414 bar) 3C sizes
1-1/4" thru 2" with working pressures to 3,000 psi (207 bar) Two piece
construction allows for various end fittings Steel, Stainless Steel or
Brass |
|
 |
CPC, CAC, CAV, & CAD Series
- Cartridge, Pilot & Dual Pilot Check
Valves
Applications: Industrial, mobile
and construction load holding equipment.
Soft
seated design 4:1 pilot ratio on all styles Flow rates to 50 US GPM
(189 l/min) 1/4" thru 1" block porting available Working pressures to
5,000 psi (345 bar) Various crack pressures available Plated steel
cartridges, Anodized aluminum blocks Self dampening
action |
|
Flow
Control Valves |
|
Snap-tites
heavy duty control valves provide an economical means of assuring
accurate flow regulation to an actuator at a predetermined flow rate. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
FRIA Series
Adjustable Inline
Flow Control Valve
Applications: Industrial and
Mobile Actuator speed control.
Pressure
compensated design Free reverse flow Sizes 1/4" thru 1" Working
pressures to 5,000 psi (345 bar) Adjustable flows to 30 US gpm (115
l/min) Fully adjustable under pressure Plated steel construction
Fingertip adjustment Locking nut standard |
 |
FRI Series
Fixed Inline Flow
Control Valve
Applications: Actuator speed
control - industrial and mobile.
Tamper
proof settings maintain system integrity Pressure compensated design
Free reverse flow Sizes 1/4" thru 1" Flow capability to 30 US gpm (115
l/min) Working pressure to 5,000 psi (345 bar) Wide range of standard
flow settings available |
|
Directional Control Valves |
|
Snap-tites
directional control valves provide control of fluid direction with
virtually zero leakage. These unique valves often eliminate the need for
an additional check valve. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
Marstan
Low Flow, High Pressure
Directional Control Valve
Applications: Directional control
for test stands, accumulator circuits, high pressure clamping, and valve
operators.
Linear
Style Valve Flow rates to 4 US gpm (15 l/min) Working pressures to
10,000 psi (690 bar) NFPA 01 size subplate mounting permits retrofit
applications Solenoid, manual or pneumatic operators available
Aluminum body, steel internals 1/4" connection subplates
available |
 |
Direc-Trol
High Flow, Rotary
Style Directional Control Valve
Applications: Manual operation of
actuators, lift gates, test stands, winches, steering circuits, offshore
production controls and accumulator circuits.
Manually
operated rotary style valve Flow rates to 83 US gpm (315 l/min)
Working pressures to 5,000 psi (345 bar) Metal-to-metal shear seal
design Aluminum, steel or 316 stainless steel housing, steel internals
Porting sizes 1/4" thru 1" Non-interflow option
available |
|
Relief
Valves |
|
System pressure
protection on fixed and variable pump systems, dynamic braking on fluid
motor systems or swing circuits on hydraulic cranes. Snap-tites relief
valves provide fast operating protection against pressure surges. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
RDC Cartridge
Differential Relief Valve
System pressure
protection against surges Flow rates to 40 US gpm (155 l/min)
Working pressures from 500 to 4,000 psi (35 to 276 bar) Plated steel
cartridge Few moving parts enhance reliability Cavity details
available for personal manufacture of manifold |
 |
RDV Valve
Single Differential
Relief Valve
Single relief cartridge (RDC) in block
Porting sizes 3/8" thru 1" Female pipe thread or female SAE O-ring
boss porting Flow rates to 40 US gpm (155 l/min) Working pressures
from 500 to 4,000 psi (35 to 276 bar) Anodized aluminum block, plated
steel cartridge |
|
 |
MDD Valve
Dual Differential Relief
Valve
Features two relief cartridges (RDC) in
single housing Crossover design allows high pressure to relieve to low
pressure side in one body Flows to 40 US gpm (155 l/min) Pressures
of 500 to 4,000 psi (35 to 276 bar) NPSF or female SAE O-ring boss
porting available. |
 |
MCD Valve
Dual Relief Valve with
Make-Up Checks
Two relief cartridges & two soft seat, free
reverse flow check valves in single body Integral make-up checks
prevent pump cavitation Flows to 40 US gpm (155 l/min) Pressures of
500 to 4,000 psi (35 to 276 bar) NPSF or female SAE O-ring boss
porting in 3/8" to 1" sizes |
|
Natural
Gas Vehicle Products (NGV) |
|
Safety is a
prime concern to Snap-tite. Snap-tite has designed a patented feature
into the nozzle that makes it one of the safest designs available. The
nozzle cannot be manually disconnected from the receptacle while under
internal pressure greater than 350psi (25bar). This feature exceeds the
requirements of NGV 1 specification. |
|
Snap-tite Complete Catalog
(14.3MB) |
|
|
 |
Natural Gas Vehicle Nozzles
CNG Fueling Nozzles
Meets interchangeability requirements of NGV1 specification Meet
requirements of Type 2 & 3 Class A & B of NGV1 specification Available
in pressures 3,000 & 3,600 psi (207 & 248 bar) Stainless steel or
brass construction Various end fittings options |
 |
Natural Gas Vehicle Receptacles
NGV1 Fueling Receptacles
Utilizes the NGV1 profile for complete interchangeability Designed for
permanent mounting in vehicle Available in pressures 3,000 & 3,600 psi
(207 & 248 bar) Stainless steel or brass construction Superior valve
design Various end fitting options Compact one piece design |
|
 |
Compressed Natural Gas Breakaway
CNG Dispenser Breakaway
Specifically designed for CNG applications Balanced design assures
positive connection Easy installation Engineered for use in both
relieving and non-relieving systems For use with pressures to 3,600
psi (248 bar) Combination of stainless steel & brass construction |
 |
Compressed Natural Gas Check Valve
Vehicle Safety Check Valve
Used in conjunction with CNG receptacle as safety measure in vehicle as
redundant check Working pressure to 3,600 psi (248 bar) Same
internal design as CNG receptacle One piece stainless steel
construction Various end fitting options |
|
