|
|
|
ProVu Series |
|
Precision Digital Complete Catalog (15.5MB) |
|
 |
PD6000
Analog Input Process Meter
The PD6000 ProVu
digital panel meter is a full-featured, high end, process meter that
represents the continuum of 34 years of development by Precision Digital
Corporation. The ProVu
joins the Sabre and Trident as the most powerful member of our 1/8 DIN
meter family. With these three products, we can provide a complete range
of process meters for all price and performance applications. One of the
most important things that the ProVu
does for our "New Generation" of products is that it makes available 2
or 4 relays with 4-20 mA output. In fact, with the expansion module, the
ProVu can control
up to eight relays. |
 |
PD6200
Analog Input Flow/Rate/Totalizer
The PD6200 ProVu
is an 1/8 DIN digital panel meter specifically designed for displaying
flow rate and total from a flowmeter with an analog output such as 4-20
mA or 0-10 V. The PD6200 is particularly well-suited for flow
applications because its six-digit, dual-line display can be programmed
for a wide variety of display configurations. For instance, the upper
line can display either flow rate, total or grand total, and the lower
line can display either flow rate, total, grand total, or engineering
units. Among other things, this makes it possible to display flow rate
and total at the same time, a very unique feature on 1/8 DIN digital
panel meters. |
|
 |
PD6300
Pulse Input Flow/Rate/Totalizer
The ProVu
model PD6300 is an 1/8 DIN digital panel meter specifically designed for
displaying flow rate and total from a pulsed input provided by open
collector, NPN, PNP, TTL, switch contact, sine wave, or square wave. The
PD6300 is particularly well-suited for flow applications because its
six-digit, dual-line display can be programmed for a wide variety of
display configurations. For instance, the upper line can display either
flow rate, total or grand total, and the lower line can display either
flow rate, total, grand total, or engineering units. Among other things,
this makes it possible to display flow rate and total, or total and
grand total at the same time, a very unique feature on 1/8 DIN digital
panel meters. |
 |
PD7000
Temperature Meter
The ProVu meter
boasts specifications and functionality that clearly makes it one of the
most advanced temperature meters available. Its dual-line 6-character
display, function keys, and optional expansion modules are only a few of
the features you will find on the ProVu.
The ProVu model
PD7000 is an 1/8 DIN digital panel meter specifically designed for
displaying temperature. The PD7000 accepts many more thermocouple types
and RTDs than earlier models, including: J, K, T, E, R, S, B, N, C
Thermocouples or 100 or 1000 Ω Platinum, 10 Ω Copper, 120 Ω Nickel RTDs.
It can be configured to have either a 1 or 0.1 degree display resolution
on any type of sensor input. |
|
Trident Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
The Model
PD765 Trident Digital Panel Meter is one of the most versatile
digital panel meters on the market and will satisfy a wide variety of
process applications. The Trident can be field programmed to accept
process voltage (0-5V, 1-5V, etc) and current (4-20 mA) inputs, 100 Ohm
RTDs, and the four most common thermocouples. It is housed in a
shallow-depth, 1/8 DIN enclosure that features a NEMA 4X front panel and
convenient mounting hardware. There are two power options for the
Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power
the transmitter if needed. Programming and setup can be performed with
the four front panel pushbuttons, free MeterView software, or using the
Copy function. |
|
Sabre Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
PD603
Sabre P Process Meter
The Sabre P
PD603 process meter combines operational simplicity with high end
features to deliver the perfect low-cost digital panel meter for display
only applications. The PD603 menu structure is easy to navigate because
the only selections are input, decimal point location and scaling
values. There are no other menu choices to add confusion during the
setup process and indirectly increase the cost of a "low-cost" meter.
However, despite being a low-cost meter, the PD603 is still packed with
many features typically found only on more expensive meters, like NEMA
4X front, universal power supply, front panel programming, input current
overload protection, and UL Listing and CE marking. |
 |
PD743
Sabre T Temperature Meter
The Sabre T
PD743 temperature meter combines operational simplicity with high end
features to deliver the perfect low-cost digital panel meter for display
only applications. The PD743's menu structure is easy to navigate
because the only selections are input, and display in °F or °C. There
are no other menu choices to add confusion during the setup process and
indirectly increase the cost of a "low-cost" meter. However, despite
being a low-cost meter, the PD743 is still packed with many features
typically found only on more expensive meters, like NEMA 4X front,
universal power supply, display to 2300 °F for type K T/C, and UL
Listing and CE marking. |
|
Loop Leader
Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
PD683 - PD688
Loop-Powered Indicators
There's nothing
stripped down or bare bones about these loop-powered indicators; they're
designed for demanding process control applications. Standard features
include a full 5-digit backlit display with bargraph, on-screen custom
engineering units, and max/min display capabilities. There are two
models available: the PD683 is for general-purpose applications and the
PD688 is for hazardous area applications. |
 |
PD684 - PD689
Loop-Powered Rate/Totalizers
These
loop-powered rate/totalizers can display rate up to five digits and
total up to eight digits using the total overflow feature. The display
can be programmed to automatically or manually toggle between rate and
total. Standard features include a backlit display with bargraph,
on-screen custom engineering units, max/min display and open collector
output. There are two models available: the PD684 is for general-purpose
applications and the PD689 is for hazardous area applications. |
|
Survivor |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
The PD662
NEMA 4X, CSA Certified Loop-Powered Meter is perfect for
applications where a simple, inexpensive display is required and AC
power is not available. The PD662 derives all its power from the 4-20 mA
loop. The PD662 is scaled using four push buttons and can be done
without applying an actual calibration signal. The PD662's display will
read up to 2999; we call this 3+ digits! The loop-powered backlighting
option lets you see the display under any lighting condition and is
powered completely from the 4-20 mA loop. This means there is no need
for additional wiring and never any batteries to change. The PD662 is
housed in a rugged NEMA4X enclosure and is provided with one ½" NPT pipe
conduit hole. The PD662 is also available with an optional DC-powered
heater that allows the PD662 to operate in temperatures as low as -55°C. |
|
ExSense T
Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
|
The ExSense T
Series is a line of rugged, smart temperature transmitters that
includes models with HART communication capability. These models can be
configured using a HART modem and a PC running the free HART software
provided, or the range can be modified in the field using a handheld
HART communicator. The other models can be configured using a USB modem
and a PC running the free software provided. All models can be ordered
with Pt100 RTD, J, K, T thermocouples
PD301 & PD306
Head Mount Models - The head mount models are offered
as: hockey-puck only (PD301 & PD302) which can be mounted inside a DIN
Form B connection head, pre-mounted in a connection head (PD303 &
PD304), and pre-mounted in a connection head with temperature probe
(PD305 & PD306). The PD302, PD304, and PD306 include HART communication
capability. Standard enclosed models have an aluminum connection head
with a 1/2" NPT conduit hole and 1/2" NPT process opening for a probe or
adapter fitting, and are available with safe area (NEMA 4X, IP66 rated),
or Certified explosion-proof housings. Non-standard models with other
conduit hole and process opening sizes, as well as an optional stainless
steel housing are available.
PD310 & PD312 Enhanced Display Models - The enhanced
display models, with standard loop-powered backlight, let the user see
the display under any lighting condition, and present valuable
information such as the process variable, input type, engineering units,
and bargraph. The display can be configured to show the PV, mA output,
or %. These models are housed in a sleek & rugged die-cast NEMA 4X
enclosure that is available in general purpose and explosion-proof
versions. The enclosure has two 1/2" NPT conduit holes, and one 1/2" NPT
process sensor connection port for probe or adapter fitting.
Non-standard models with other conduit hole and process opening sizes
are available. For remote mounting applications the PD310 may be ordered
without the process sensor connection port. |
|
Snooper |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
The PD865
Snooper is a digital panel meter that can be programmed as a Modbus RTU
Master, Slave or Snooper. In Snooper mode, the Snooper can sit
anywhere on the Modbus network and display any process variable on the
bus. The special thing about Snooper mode is you don’t have to change
the programming of the other and it constantly monitors that location
and displays the PV on the digital readout. |
|
ProtEX Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
PD6870 ProtEX-One
Explosion-Proof Loop-Powered Meter
The PD6870 is a
rugged, loop-powered meter with 1" display digits in an explosion-proof
enclosure for demanding applications in hazardous areas or in the
harshest environmental conditions. The meter derives all of its power
from the 4-20 mA loop with a small 1 volt drop for easy installation in
almost any system. It is programmed using four easy to access
front-mounted control dials with no complex or difficult to read
programming menus necessary for setup. The numeric display will read
from -1999 to 1999 over a 2000 count user adjustable scaling span. The
backlight option lets you see the display under any lighting condition
and is powered from the 4-20 mA loop with no additional power supply
required. |
 |
PD663 ProtEX-Lite
Explosion-Proof Loop-Powered Meter
The PD663 is a
rugged, explosion-proof NEMA 4X loop-powered meter perfect for
applications where a simple, inexpensive display is required in a
hazardous area. The PD663 derives all its power from the 4-20 mA loop.
The PD663 is scaled using four push buttons and can be done without
applying an actual calibration signal, and through the explosion-proof
enclosure with optional magnetic reed switches and a magnet key. The
PD663's display will read up to 2999; we call this 3½+ digits! The
loop-powered backlighting option lets you see the display under any
lighting condition and is powered completely from the 4-20 mA loop. This
means there is no need for additional wiring and never any batteries to
change. The PD663 is housed in a rugged, explosion-proof, cast aluminum,
NEMA 4X enclosure and is provided with two threaded conduit holes and
integrated pipe or wall mounting holes. |
|
 |
PD6800 ProtEX
Explosion-Proof Loop-Powered Meter
The PD6800 is a
rugged, explosion-proof NEMA 4X loop-powered meter perfect for
applications where a 5-digit display with 7 alpha-numeric character
legend is required in a hazardous area. The PD6800 derives all its power
from the 4-20 mA loop. The PD6800 is configured and scaled using four
push buttons and can be done without applying an actual calibration
signal, and through the explosion-proof enclosure window with SafeTouch®
infrared buttons. The PD6800's display will read up to 99999 digits. The
loop-powered backlighting option lets you see the display under any
lighting condition and can be powered from the 4-20 mA loop, or separate
DC power. The PD6800's rugged cast aluminum enclosure is provided
with two threaded conduit holes and integrated pipe or wall mounting
holes. It boasts an operating temperature range of -40 to 75°C. When
released, the PD6800 will carry a number of agency approvals, including
FM, CSA. ATEX, and IEC. |
 |
PD6820 ProtEX
Explosion-Proof Rate/Totalizer
The PD6820 is a
rugged, explosion-proof NEMA 4X loop-powered meter perfect for
applications where a 5-digit display with 7 alpha-numeric character
legend or Total is required in a hazardous area. The PD6820 derives all
its power from the 4-20 mA loop. The PD6820 is configured and scaled
using four push buttons and can be done without applying an actual
calibration signal, and through the explosion-proof enclosure window
with SafeTouch™ infrared buttons. The PD6820's display will read up to
99999 digits. The loop-powered backlighting option lets you see the
display under any lighting condition and can be powered from the 4-20 mA
loop, or separate DC power. The input can be scaled using linear, square
root, or programmable exponent functions. The PD6820's rugged cast
aluminum enclosure is provided with two threaded conduit holes and
integrated pipe or wall mounting holes. It boasts an operating
temperature range of -40 to 75°C. When released, the PD6820 will carry a
number of agency approvals, including FM, CSA. ATEX, and IEC. |
|
 |
PD6830 ProtEX
Explosion-Proof Multi-Powered Pulse Input Rate/Totalizer
The PD6830 is a
rugged, explosion-proof NEMA 4X pulse-input rate/totalizer is perfect
for applications where a 5-digit display with 7 alpha-numeric character
legend and/or or Total is required in a NEMA 4 and/or hazardous area
enclosure. The PD6830, and its backlight, can be battery, DC, or output
loop-powered. The PD6830 has four optical sensors that operate as
through-glass buttons (SafeTouch™ infrared buttons) used to configure
and scale with or without applying an actual calibration signal. The
PD6830's display will read up to 99999 digits. The pulse input is
isolated and can accept a wide range of flow transmitters, including the
mV input from a magnetic flowmeter as well as high frequency signals.
The PD6830's rugged cast aluminum enclosure provides three threaded
conduit holes and integrated pipe or wall mounting holes. It boasts an
operating temperature range of -40 to 75°C. The PD6830 enclosure carries
a number of agency approvals, including FM, CSA. ATEX, and IEC. Full
product approvals are pending. |
|
Fluidwell
Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
The Fluidwell
F-Series is a line of indicators and controllers especially developed
for flow, temperature, pressure, and level applications in industrial
environments. A rugged and weather-proof aluminum field enclosure
provides NEMA 4X/IP67 protection. A more cost effective plastic
enclosure offers the same ingress protection ratings and is ideal for
salty environments. The enclosures can be mounted directly onto sensors,
walls, or pipes, and are also suitable for panel mount applications;
especially those that require minimal depth clearance. Most F-Series
models have an operational temperature range from -40 to 80°C (-40 to
178°F). F0 Series indicators and controllers are available with
hazardous area approvals including FM, CSA, ATEX, and IECEx. F1 Series
indicators and controllers are ATEX and CE certified. Basic indicators
such as the F010, F040, F050, F070, and F090 come with a 5½ digits, 1"
high display with legend. More sophisticated models feature a dual-line
display with a 7-digit, 0.7" high top display and an 11-digit, 0.3" high
alphanumeric bottom display. Fluidwell displays also include status and
function indicators for an even more informative reading. Backlight is
available on all models, and select models feature red backlighting for
alarm indication.
Fluidwell F-Series Product Guide (2.6MB) |
|
ConsoliDator® |
|
Precision Digital Complete
Catalog (15.5MB) |
|
|
Easy to read backlit
LCD, readable in direct
sunlight. Bargraphs & numeric
screens. Easy to set up &
program. Set up with front panel
keys. Intuitive menus in
English. Detailed individual
screens. Input simulation
feature. Low-flow
cutoff. Powered from AC or
DC. Panel or wall
mount. RS-232 Modbus®
RTU. FREE Programming & data
logging
software. Applications include: •Tank level
monitoring •Sump pump
control •Lift station level
control •Dam level
indication •Well level
monitoring •Boiler drum
level •Pump alternation
control •Analog & pulse
inputs •Flow rate & total
display •Temperature
transmitters •Pressure
transmitters •Gas detection
systems •Plunger lift
systems •Alarm & control
relays. |
|
NOVA Series |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
PD540
Temperature Controllers
The PD540 is a
1/16 DIN Nova Digital Temperature Controller with auto-tuning PID
control capabilities. One of four user programmable set points may be
selected for PID control in the form of time proportional relay on/off
output, time proportional voltage pulse, or 4-20 mA signal control. Its
universal input accepts 23 input varieties, including thermocouple, RTD,
and voltage inputs and can be easily configured for a 4-20 mA input. The
relays may be programmed as alarms with 20 different high, low, and
deviation alarm types that can include fail-safe operation. Digital
input options add the ability of external contacts to operate the
controller. RS-485 serial communication options include protocols for
Master/Slave set point control, Modbus ASCII and RTU, as well as PC
software. |
 |
PD550
Ramp and Soak Controllers
The PD550 series
are programmable temperature controllers with auto-tuning PID control
capabilities. Two programs store 15 segments each for precision set
point control. At the completion of a program, these controllers can
hold the set point, stop the outputs, or loop to one of the programs,
enabling one 30-segment program to be used. Its universal input accepts
23 input varieties, including thermocouple, RTD, and voltage inputs and
can be easily configured for a 4-20 mA input. The relays may be
programmed as alarms with 20 different high, low, and deviation alarm
types that can include fail-safe operation. Digital input options add
the ability of external contacts to operate the controller and digital
output options are available. RS-485 serial communication options
include protocols for Master/Slave set point control, Modbus ASCII and
RTU, as well as PC software. Various DIN sizes are available. |
|
 |
PD560
Temperature Indicators
The PD560 Series
of meters combines excellent standard features including a universal
input, alarm relay, and a 4-20 mA retransmitting output with powerful
options including an additional two alarm relays, digital inputs, and
RS-485 serial communication including Modbus. |
 |
PD570
Temperature Limit Controllers
The PD570 Series
of Limit Controllers come equipped with a limit control latching relay,
alarm relay, and a 4-20 mA retransmitting output. These standard
features make the Limit Controller an excellent process monitoring tool.
Serial communications for Modbus or PC monitoring software expands the
Limit Controller's capability. |
|
Scanners & Annunciators |
|
Precision Digital Complete
Catalog (15.5MB) |
|
|
Vigilante
II Point Annunciator
From urgent
alarms to routine messages, the Vigilante® handles all types of
operational messages with simplicity and economy. The Vigilante®
delivers clear, eye catching (and ear catching) information to the plant
operators. Alarm outputs from Precision Digital meters, alarm relays,
logic levels from 5 to 28 VDC, and switches for parameters such as
temperature, pressure, flow, level and proximity can all be fed directly
into the Vigilante®. |
|
MINIMUX 8 Channel Scanner
The MINIMUX® is
a microprocessor-based 8 channel analog input scanner/multiplexer and
annunciator that provides low-cost automatic switching for multi- point
display and alarm systems. Each Minimux® can automatically switch up to
eight inputs to another device such as a digital panel meter,
controller, or PLC. Signal switching is done with reed relays making the
Minimux® ideal for switching thermocouples, RTDs, control loops, and AC
& DC signal |
|
Precision
Calibrator |
|
Precision Digital Complete
Catalog (15.5MB) |
|
 |
The PD9500
Precision Calibrator sources voltage, current, TC, RTD, and ohms
with a second completely isolated measurement channel for a single
laboratory calibration instrument unmatched in versatility, performance,
and value. The PD9500 calibrator's world-class performance and features
are accessed through a very simple-to-use, intuitive user interface.
Precision Digital's PD9500 calibrator is truly a "process calibration
laboratory in a box."
|
|
