 |
|
 |
 |
The Automation Group is an industry leader in the design, production, and marketing of a full spectrum of quality pneumatic and electromechanical components and systems to provide force and motion and control for industrial, commercial, semi-conductor, mobile, marine and energy-related machinery and equipment. |
|
Watts FluidAir |
|
|
parker/Watts Air Preparation Units offer piped ports from sizes 1/4" to 2½". Included in this line of Watts products are: Particulate Filters, Coalescing Filters, Oil Removal Filters, Desiccant Dryers, In-Line Bronze Filters, Regulators, Pilot-Operated Regulators, Precision Regulators, Lubricators, QIX Modular FRL System, Integral Filter/Regulators, Combination Units, Relief Valves, Tank Drains, & Pressure Sensors |
|
|
parker/Watts Miniature FRL Series offer piped ports from sizes 1/8" to 1/4". Included in this line of Watts products are: Particulate Filters, Coalescing Filters, Regulators, Lubricators, Integral Filter/Regulators, Combination Units, Relief Valves |
|
|
parker/Watts QUBE Modular FRL Systems fasten together with mounting blocks, plates, and brackets. QUBE systems offer sizes from 1/8" to 1½". Included in this line of Watts products are: Particulate Filters, Coalescing Filters, Regulators, Lubricators, Integral Filter/Regulators, Combination Units, Valves, & all of the components required to modularize a complete system with any combination of parts. |
|
|
parker/Watts Stainless Steel FRL offer piped ports from sizes 1/4" to 1/2". Included in this line of Watts products are: Particulate Filters, Coalescing Filters, Regulators, Lubricators, Integral Filter/Regulators, Combination Units |
|
|
Dial regulators feature a transparent, pressure-calibrated, non-rising adjustment dial for quick adjustment of secondary pressure. If a gauge is required for monitoring reasons, two 1/4-inchgauge ports are provided; however, these are usually used for additional outlet ports. The full reduced pressure range can be dialed in less than 270° of dial rotation. This feature is particularly advantageous if secondary pressure must be changed frequently. The transparent dial can be color or graphics coded for easy reference to required pressure changes. Dial regulators can be mounted in any position so dial face is always visible. All Dial units have a slight constant air bleed:0.05 SCFM (0.024 dm3/s), at 100 PSIG (6.9 bar) inlet and 90 PSIG (6.2 bar) outlet. |
|
|
The new P3HP Regulator is designed to quickly and accurately adjust and maintain a set output pressure. The unit will operate regardless of flow, in response to an electronic control signal. The media can be compressed air or an inert gas. Applications for this technology are virtually unlimited; from paint spray control, paper manufacturing and printing to weaving and laser cutting control; in fact anywhere that requires accurate remote pressure control. |
|
|
In many cases, conventional air line lubricators cannot supply adequate lubrication to tools, cylinders, etc. This is due to many factors such as long distances between tool and lubricator, intermittent flow, and complex piping. Parker/Watts Injection Lubricators are designed to deliver precise amounts of oil directly to the point of lubrication as required. To ensure proper lubrication, our injection lubrication products and accessories are available to cover a wide range of applications. |
|
|
The PRNA, PRN, and PROA series incorporate a rounded vane design, which provides lower vane seal bypass than typical vane rotary actuators. The shaft and vane are machined from one piece, to which the vane seal is molded, creating a one piece shaft, vane, and vane seal assembly. They can be operated with lubricated or non-lubricated, filtered air at pressures ranging from 0.2 to 1.0 MPa (30 to 150 psi). Standard internal bumpers provide quiet operation for high speed applications. The standard rear output shaft provides for an easily accessible manual override in the event air pressure is lost. |
|
|
parker/Watts Pneumatic Control Components include: *International In-Line Valves (8L-BSP / 8M-NPT) *Heavy Duty In-Line (7D-BSP / 7N-NPT) *Pilot Valves and Sensors (4N, 5N, Auximax, Miniature Pilot Valves, Manual/Mechanical Valves, Air Line Accessories) *Solenoid Valves In-Line (Series 5-BSP / 9N-NPT) *Logic Air Control Components *Ancillary Valves Air Control Components *VS Series In-Line / Subbase Air Control Components *VSP Series Modular Electronic Valve Islands |
|
|
Ready-to-use miniature one piece fitting for use with most thermoplastic and soft copper tubing. This fitting was designed to meet the needs of the motion control industry where fast assembly, disassembly and reassembly is important. No special tools needed for assembly; just insert the tubing until it bottoms. Microlok is designed to be used without a tube support to provide full flow through the tubing. The collet design of Microlok grips the tubing securely to provide tubing retention. The Microlok fitting comes in externally threaded hex and round straight fitting body styles and in a range of shaped configurations. Microlok straight fittings have a nickel plated brass body and shaped fittings have a composite body with nickel plated brass componentry. Microlok external pipe threads come with a pre-applied white acrylic sealant. Positional external pipe threaded ends are featured on shapes for installation in compact areas and for precise positioning. |
|
|
parker/Watts Pneumatic Airline Accessories include: *Safety Blow Guns *Ball Valves, Plug Valves *Lockout Valves *Flow Controls & Accessories *Fittings & Hose *Fittings & Tubing *Airline Accessories *Quick Couplings & Adapters |
