|
 |
Ashcroft Main Page ·
|
|
Temperature Instrumentation |
|
| |
|
|
CI Series Bimetal Thermometers (±1% of span) This series is tamper proof, hermetically sealed and has the Maxivision® dial. The connection locations are rear and lower. The CI series of Ashcroft® industrial bimetal thermometers was designed for applications where external adjustment or pointer reset are not desired. The hermetic seal prevents entry of moisture into the casing, thus minimizing the possibility of fogging inside the case. The Maxivision dial provides accurate temperature readings. |
|
|
EI Series Bimetal Thermometers (±1% of span) This series has a hermetic seal and an external adjustment in the rear of the case. As with other Ashcroft® industrial bimetal thermometers, it has a Maxivision® dial which eliminates parallax by placing the pointer on the same plane as the graduations. The connection locations are rear, lower, and Everyangle.™ The hermetic seal prevents entry of moisture into the casing, thus minimizing the possibility of icing or fogging inside the case. The window stays clear, and with the Maxivision dial, precise readings are certain. |
|
|
EL Series Bimetal Thermometers (±1% of span) This series - liquid filled - is available in 3" rear, 5" rear, and 5" Everyangle™ connections. The external adjustment is standard. The Ashcroft® liquid-filled thermometer provides the same features as the EI style with the added benefit of liquid filling. The potential wear problem caused by excessive vibration is minimized through dampening and the instrument life is prolonged. The liquid medium also improves readability. |
|
|
FT Series Pocket Test Bimetal The sturdy 1" test thermometer offers accuracy and versatility normally found in larger, more expensive instruments. The Ashcroft® pocket test thermometer provides precise temperature readings in solids, liquids, and gases - such as frozen food, meats, vats, cookers, stills, air-conditioning ducts, and in numerous other places. Protective clip-sheath fastens securely to a pocket, holding the thermometer safely, yet readily accessible. An external adjustment feature permits simple zero reset in seconds by clamping hex nut under head firmly and rotating the head by hand. |
|
| |
|
|
2400E and 2410E Digital Thermometer (±2° NSF per C-2) The Ashcroft® 2400E and 2410E digital thermometers are compact, solid state temperature measurement and display devices. The 2400E measures temperature with a laser-trimmed 2000 ohm RTD contained in a stainless steel probe. The signal from the RTD is conditioned and sent through an analog-to-digital converter and is shown on a LED display. The unit is powered by 6 Vdc, which is delivered through a power supply that operates on 110 Vac (220 Vac and 24 Vac are optional). When more than one indicator is required, two thermometers can be operated by one 110 Vac supply. The power supply is UL recognized and the complete unit is NSF approved for class C-2 applications. |
|
| |
|
|
600A-01 Series Duratemp® Thermometer (±1% F.S.) A high impact-resistant polished stainless steel case. Bayonet ring facilitates easy removal for glass replacement and pointer adjustment. A versatile case that enables surface or flush mounting. Available in 4.5" dial size. Exclusive movementless design resists shock and vibration - no gears to wear or misalign resulting in increased instrument life. Gas-operated molecular sieve. No elevation error. Mercury free. One bulb size for all ranges. |
|
|
600A-02 Series Duratemp® Thermometer (±1% F.S.) An aluminum case with a durable epoxy finish. Designed specifically for panel mounting. A hinged ring permits glass replacement and pointer adjustment. Available in 4.5", 6", and 8.5" sizes. Exclusive movementless design resists shock and vibration - no gears to wear or misalign resulting in increased instrument life. Gas-operated molecular sieve. No elevation error. Mercury free. One bulb size for all ranges. |
|
|
600A-03 Series Duratemp® Thermometer (±1% F.S.) A black-coated aluminum case with excellent impact resistance. Threaded ring permits adjustment. Available in 4.5" and 6" sizes.. Exclusive movementless design resists shock and vibration - no gears to wear or misalign resulting in increased instrument life. Gas-operated molecular sieve. No elevation error. Mercury free. One bulb size for all ranges. |
|
|
600A-04 Series Duratemp® Thermometer (±1% F.S.) The phenolic case construction is ideal for most ambient conditions. Flush or surface mounting. Snap ring permits pointer adjustment. Available in 4.5", 6", and 8.5" sizes. Exclusive movementless design resists shock and vibration - no gears to wear or misalign resulting in increased instrument life. Gas-operated molecular sieve. No elevation error. Mercury free. One bulb size for all ranges. |
|
|
600B Series Duratemp® Direct-Mounted Thermometer The direct-reading thermometer (stainless steel case only) offers the same unique features of the Ashcroft® Duratemp® remote-reading thermometer for those critical applications where only a direct-connected instrument can be used. Available in 4.5" dial size. The Everyangle™ Duratemp™ thermometer may be rotated 360° for readability and the stem turned 180° for the most challenging installations. |
|
|
600H-45 Series Duratemp® Thermometer (±1% F.S.) This hermetically sealed case is designed for applications where extreme moisture or dust is present. Available in a 4.5" solid front phenolic turret case, lower connection. Exclusive movementless design resists shock and vibration - no gears to wear or misalign resulting in increased instrument life. Gas-operated molecular sieve. No elevation error. Mercury free. One bulb size for all ranges. |
|
| |
|
|
T400-Series Temperature Switch B400-Series Pressure and Differential Pressure Switches This general purpose Ashcroft® switch series is ideal for use in virtually all Industrial and OEM applications. Watertight epoxy coated aluminum, NEMA Type 4, 4x, IP66 enclosure. Single setpoint, fixed deadband, SPDT or (2) SPDT. Stainless steel and Buna, Viton®, or Teflon® or All-welded Stainless Steel or All-welded Monel wetted parts. |
|
|
T700-Series Temperature Switch B700-Series Pressure and Differential Pressure Switches This general purpose Ashcroft® switch series is ideal for use in virtually all Industrial and OEM applications. Explosion proof, NEMA Type 7, 9, IP66 enclosure. Single setpoint, fixed deadband, SPDT or (2) SPDT. Stainless steel and Buna, Viton®, or Teflon® or All-welded Stainless Steel or All-welded Monel wetted parts. |
|
|
FT-Series Compact Temperature Switch, Explosion-Proof Body F-Series Compact Pressure Switch, Explosion-Proof Body Special features include diaphragm-sealed piston actuator for long, reliable service, choice of wetted materials and pressure connections for all applications, watertight anodized aluminum body for environmental protection, epoxy coating available (XEC), hermetically sealed snap-acting switch element, field adjustable, standard 1/2" NPT Male electrical conduit connection, factory sealed leads, directly interchangeable with many similar models for convenience, UL and CSA listed standard. |
|
|
GT-Series Temperature Switch, Watertight 316 SS Enclosure G-Series Pressure and DP Switches, Watertight 316 SS Enclosure Stainless steel enclosure offers greater corrosion protection for this high-performance switch in breweries, dairies, chemical and petrochemical plants, offshore rigs and pulp and paper mills. Single or dual setpoint, fixed or adjustable deadband, SPDT or (2) SPDT contacts. |
|
|
LT-Series Temperature Switch, Watertight Enclosure L-Series Pressure and DP Switches, Watertight Enclosure General purpose switches for most industrial and process applications. Single or dual setpoint, fixed or adjustable deadband, SPDT or (2) SPDT contacts. |
|
|
PT-Series Electronic Temperature Switch, Watertight or Explosion-Proof P-Series Electronic Pressure & DP Switches, Watertight or Explosion-Proof This top-of-the-line Ashcroft® process switch series includes many state-of-the-art features for safety and reliability in virtually all process applications. Die cast aluminum enclosure is standard with NEMA 4X (weatherproof, corrosion resistant) NEMA 7 (explosion-proof enclosure Class I, Div. 1 & 2, Groups B, C & D and Class II, Div. 1 & 2, Groups E, F & G). Dual chamber design allows setpoint changes to be made safely even with power connected. Single or dual independently adjustable setpoints meet all setpoint requirements. UL, CSA listed. Fixed or adjustable deadband. |
