ASCO TriPoint offers Pressure & Temperature Switches for OEM, Industrial & Nuclear applications including Miniature, Compact & Industrial size products.

ASCO Today Catalog (PDF 6.19MB)

ASCO Main Page ˇ ASCO Sizing Software (HTML)

Pressure Sensors     Pressure/Temperature Switches

 

Media Isolated Pressure Sensors

ASCO pressure sensors provide accurate measuring and linear electrical output signals for many process fluids. The MEMs based sensor and one-piece pressure cavity provides stable output measurements from 0 to 10,000 psi and supplies high sensitivity, low drift and highly repeatable signaling. Electrical options include flying leads, pins, spade terminals, or explosion-proof or intrinsically safe versions. Mechanical options include panel mounting, 316ss pressure vessel or Inconel with process connections of 1/8-1/2 inch NPT, and other specialty threading. Output signal options include 4-20m Amp or 1-5 Volt.

Pressure Sensors (PDF 2.5MB)

Installation & Maintenance Manuals Available (Contact Us)

CAD Drawings Available (Contact Us)

Don't forget the ASCO Standard Red Hat (HTML)

Series-40 Isolated Pressure Sensor

Series-42 Panel Mount Pressure Sensor

Series-43 Hazardous Location Sensor

Series-44 Intrinsically Safe Sensor

Series-46 Explosionproof Sensor

Series-47 High Accuracy Sensor

• High Strength Stainless Steel Construction.

• No silicone oil, no internal o-rings, no welds.

• Wide operating temperature range.

• Ranges up to 10,000 PSI.

• Rugged design survives harsh environments.

• Compatible with wide range of gases and liquids.

• Suitable for high shock and vibration applications.

• Panel up to .3" thick.

Series-45 Tank Level Sensor

• High Strength Stainless Steel Construction.

• No silicone oil, no internal o-rings, no welds.

• Wide operating temperature range.

• Ranges up to 100 PSI.

• Rugged design survives harsh environments.

• Compatible with wide range of gases and liquids.

• Suitable for high shock and vibration applications.

Series-48 Combination Pressure/Temperature Sensor

• High Strength Stainless Steel Construction.

• No silicone oil, no internal o-rings, no welds.

• Wide operating temperature range.

• Ranges up to 1,000 PSI.

• Low static & thermal errors.

• Rugged design survives harsh environments.

• Compatible with wide range of gases and liquids.

• Suitable for high shock and vibration applications.

Series-50 Wet/Wet Differential Pressure Transmitter

• High Strength Stainless Steel Construction.

• No internal o-rings.

• Wide operating temperature range.

• No internal fluid filled cavities.

• EMI/RFI protection to 100V/m.

• Low static & thermal errors.

• Rugged design survives harsh environments.

• Suitable for high shock and vibration applications.

 

 

Pressure & Temperature Switches

ASCO pressure and temperature switches are a range of miniature to industrial size switches designed to signal when process media reaches a set point of pressure or temperature. The transducer will operate a mechanical snap switch when the set point has been reached, and will reset when the process media conditions drop below the dead band. Options include fixed or adjustable dead band and a a wide range of set points of vacuum to 8000 psi and temperatures of -60ē to 640ēF (-51ē to 337ēC).

Pressure/Temperature Switches (PDF 1.6MB)

Installation & Maintenance Manuals Available (Contact Us)

CAD Drawings Available (Contact Us)

Don't forget the ASCO Standard Red Hat (HTML)

J-SERIES Miniature Pressure Switches w/ Non-Adjustable Set Points

J-Series miniature pressure switches have factory-set non-adjustable set points and fixed deadband, with diaphragm/piston sensor.  J-Series switches are CSA approved and UL listed under "Industrial Control Equipment".  J-Series switches are sealed with specially compounded epoxy that maintains its sealing integrity from -40 to 250°F.

H-SERIES Miniature Pressure Switches with Adjustable Set Points

H-Series miniature pressure switches have field adjustable set points and fixed deadband, with diaphragm/piston sensor. They are available in open frame construction, Type 1 general purpose or Type 4 watertight enclosures. The resilient diaphragm/piston construction helps provide long life and maintains set point repeatability despite environmental temperature variations. The full size electrical switch is a precision UL listed, snap-action type. H-Series switches are CSA approved and are UL listed under "Industrial Control Equipment".

P-SERIES Switches for Vacuum - 6000 psig with Open Frame, Type 1,4 Enclosures

P-Series pressure switches consist of an open frame or enclosure protected switch unit and a transducer unit. They can be ordered separately for customer stocking and/or field assembly or as a complete factory-assembled unit.  Switches for Vacuum through 6000 psig with Adjustable Set Points and Fixed or Adjustable Deadband.

S-SERIES Switches for Vacuum - 8000 psig, Differential or Level with Type 1,4,7,9 Enclosures

S-Series pressure switches consist of an open frame or enclosure protected switch unit and a transducer unit. They can be ordered separately for customer stocking and/or field assembly or as a complete factory-assembled unit.  Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures.

P-SERIES Switches for -60 through 510°F with Open Frame, Type 1,4 Enclosures

P-Series Temperature switches consist of an open frame or enclosure protected switch unit and a transducer unit. They can be ordered separately for customer stocking and/or field assembly or as a complete factory-assembled unit.  Switches for -30 through 510°F with Adjustable Set Points and Fixed or Adjustable Deadband.

S-SERIES Switches for -60 through 640°F with Type 1,4,7,9 Enclosures

S-Series Temperature switches consist of an open frame or enclosure protected switch unit and a transducer unit. They can be ordered separately for customer stocking and/or field assembly or as a complete factory-assembled unit.  Switches for -30 through 640°F with Adjustable Set Points, Fixed or Adjustable Deadband and General Purpose, Watertight or Explosion-Proof Enclosures.

Marine Service Pressure Switches

These pressure switches are specially engineered for the harsh environment of offshore applications. They are highly reliable and ideally suited for use on platform panelboards, oil/gas wellheads and emergency shutdown systems.